AEC Corporation gap sensor Monitor System WORLD MAP AEC Corporation
AEC Corporation Company mail japanese top
Porpose of Measurment
Vibration, Displacement, Rotation
GAP-SENSOR AEC-55 series
Sensor unit Type: PU Converter Type: AEC-55
  • Diameter: 0.93 to 40 mm
  • Resolution: 0.5 μm
  • Heat resistance temperature: 120°C or 180°C
    		•
  • Standard compact design
  • Frequency response: DC to 30 kHz
    		•
    Built-in power supply converter Type: AEC-55MS Broadband converter Type: AEC-55HF
  • A power supply is integrated into the AEC-55model.
  • Free power supply: AC85 to 264 V
  • The converter is equipped with a visible liquid crystal voltage indicator.
  • One of several sensors is selected by toggle action.
  • The volume control is located on the front panel.
  • High-frequency response type added to the AEC-55 converter.
  • Frequency response: DC to 200 kHz
    		•
    â-²TOP
    Dual Coil GAP-SENSOR AEC-37 series
    Sensor unit Type: DPU Converter Type: AEC-37
  • Diameter: 10 mm (minimum measuring length: 5 mm)
  • The sensitivity is less affected on the material of a target.
    		•
  • Standard type
  • Frequency response: DC to 10 kHz
    		•
    Built-in power supply converter Type: AEC-37MS  
  • Free power supply: AC85 to 264 V
  • One of several sensors is selected by toggle action.
  • The volume control is located on the front panel.
    		•     
    â-²TOP
    Shielded GAP-SENSOR PF series
    Sensor unit Type: PF Converter Type: CFC
  • The shielded sensor design eliminates the influence ofã??surrounding metallic objects.
  • The temperature drift is decreased.
  • Heat resistance temperature: 140°C
    		•
  • Standard design
  • Frequency response: DC to 20 kHz
    		•
    Built-in power supply converter Type: CFC-MS
  • A power supply is integrated into the CFC converter.
  • Free power supply: AC85 to 264 V
  • The converter is equipped with a visible liquid crystal voltage indicator.
  • One of several sensors is selected by toggle action.
  • The volume control is located on the front panel.
    		•     
    â-²TOP
    Built-In Amplifier GAP-SENSOR ML series
    Built-in amplifier sensor unit Type: ML-06 Linear amplifier Type: AEC-59B06FC-01
  • Only turning on the power supply starts operation.
  • This series is suitable for slip rings.
  • The output of the ML-06 amplifier is linearized.
    		•
    â-²TOP
     
    Contact
    Main Office, Japan 3-2-1, Nagao, Tama-ku, Kawasaki-City, Kanagawa, 214-0023 Japan
    Tel: +81-44-900-3222 / Fax: +81-44-900-3291
    Copyright (C)2006 AEC Corporation All Rights Reserved.