Vibration monitoring system with gap sensor
It is possible to check if gap sensor is set in normal position
Alarm output is 2 points(HH,HI)
Length between gap sensor and monitor can be extended to several 10m with extension cable
Power supply for sensor is built in monitor
Amplitude indication range | 0~100μm(*Depending on measuring range of sensor) |
Gap indication range for setting sensor | It is decided by sensor measuring range |
Frequency characteristics | 5Hz~10kHz(There is an option) |
Alarm and Trip programed range | Depend on the meter full scale |
Alarm and Trip operation delay time | Selectable from the right | 0.1,0.5,1~10,15,30,45,60sec |
Alarm and Trip indication | LED indication of Alarm(wellow) and Trip(red) |
Alarm and Trip relay specification | Each 1C contact point |
Contact point rating | AC125V,0.5A,DC110V 0.3Aload resistance |
P.UOK indication | Green LED for showing normal operation and set position of sensor |
Operating temperature | 0~+40℃ |
VIB voltage output | 10Vp-p 1kΩ(Operation panel BNC terminal) |
VIB current output | 4~20mA(Back surface OUT terminal) |
Power supply | AC85~264V 47~440Hz |