75S-4DT
Axis position monitoring system with gap sensor
Axis position analog indicator with gap sensor
It is possible to monitor axis position with gap sensor. Alarm outputs are 4 points independent setting.
Adaptation converter
AEC-76
Feature・Special order specification
Axis position monitoring system with gap sensor
It is possible to check if gap sensor is set in normal position
Alarm output is 4 points(HH,HI)
Length between gap sensor and monitor can be extended to several 10m with extension cable
Power supply for sensor is built in monitor
75S-4DT Monitor specification
| Displacement indication range | -2mm～＋2mm(*depending on measuring range of sensor) |
| Frequency characteristic | DC～100Hz(There is an option) |
| Alarm and Trip programed range | Within 80% of meter indication | Alarm and Trip can be programed both upper and lower limit respectively | 4 point in totall |
| Alarm and Trip operation delay time | Selectable from the right | 0.1,0.5,1～1015,30,45,60sec |
| Alarm and Trip indication | LED indication of Alarm(wellow) and Trip(red) |
| Alarm and Trip relay specification | Each 1C contact point |
| Contact point rating | AC125V,0.5A,DC110V 0.3Aload resistance |
| P.UOK indication | Green LED for showing normal operation and set position of sensor |
| P.UOK indication | 0～＋40℃ |
| THRUST voltage output | 0～10V 1kΩ(Operation panel BNC terminal) |
| THRUST Current output | 4～20mA(Back surface OUT terminal) |
| Power supply | AC85～264V 47～440Hz |
Outer dimension
Configuration
System configuration
Option (Separately sold item)
Output cable：OC-202BN-010
Power cable：AC-202-266
Panel cutout dimension
When mouting bezel to both side
When mounting bezels on both side of multi-channels
