MGN-16A-02
No through-holes are required for rotational speed measurement.
Measure the number of revolution by detecting the magnetic field.
Rotational speed measurement is possible from the outside of the casing with no through-holes. In addition, since the sensor part is made of metal, it has excellent environmental resistance.
Relevant product
MGS-1-01
Feature・Special order specification
Excellent followability (10,000～200,000 rpm)
Installed in WRC racing cars
Square wave output that is easy to use with connected devices
MGN-16A-02 Specification
| Measuring target material | magnet / magnetizing nut |
| Past record | Using magnetizing nut φ15×8mm |
| Gap to measure | 31 mm or less from the center of the magnetizing nut | A non-magnetic metal wall thickness between the magnetizing nut and the sensor is recommended to be 10 mm or less. |
| Measurable rotational speed | -20℃～200℃ (sensor part only)10,000～200,000 rpm | Internal test 66,000rpm 150,000rpm at the past record |
| Operating temperature range | -20℃～200℃ (sensor part only) |
| Sensor dimension | Total length about 40mm (Threaded part M16×1.5 36mm) |
| Weight | About 40g |
